1.5 inch 36mm PRT PT361 Thermal Printer Mechanism PT361P
•Ƙarfin wutar lantarki
Wutar lantarki da ake amfani da ita don fitar da shugaban firinta na thermal daidai yake da ƙarfin hankali, ko kuma ana sarrafa shi ta hanyar layin wuta guda 5 V, kewayon ƙarfin aiki shine 4.2V-10V.
•Ƙananan ƙara
Karamin da haske Na'urar tana da ƙarfi da haske, Girma: 57.55mm (nisa) * 32.7mm (zurfin) * 15.10mm (tsawo)
•Buga tare da
Babban ƙudiri Babban shugaban firinta mai ɗigo 8/mm yana sa bugu a bayyane da daidaito
•Babban saurin bugu
Dangane da ikon tuƙi da azancin takarda mai zafi, saita saurin bugu daban-daban da ake buƙata. Saurin bugawa shine 80 mm/s (max.)
•Sauƙaƙan lodin takarda
Tsarin abin nadi na roba mai lalacewa yana sa ɗaukar takarda ya fi sauƙi 6. Ƙaramar amo Thermal line dot bugu ana amfani da shi don tabbatar da ƙaramar buguwar amo.
•Rijistar tsabar kuɗi
•Farashin POS
•Tashoshi masu ɗaukar nauyi
•Na'urorin aunawa
•Kayan aikin likita
•Mitar tasi
•Ma'aunin nauyi
| Tsarin Tsarin | Saukewa: PT361 |
| Hanyar bugawa | Zazzage layin kai tsaye |
| Ƙaddamarwa | dige 8/mm |
| Max. Nisa Buga | 36mm ku |
| Adadin Dige-dige | 288 |
| Nisa Takarda | 45.5 ± 0.5mm |
| Max. Saurin bugawa | 80mm/s |
| Hanyar Takarda | Mai lankwasa |
| Shugaban zafin jiki | By thermistor |
| Fitar Takarda | Ta hanyar firikwensin hoto |
| Black Mark | Ta hanyar firikwensin hoto |
| Buɗe Platen | NA |
| TPH Logic Voltage | 2.7V-5.5V |
| Fitar da Wutar Lantarki | 4.2V-8.5V |
| Shugaban (Max.) | 4.0A (8.5V/64 dige) |
| Motoci | Max. 420mA |
| Kunna bugun jini | miliyan 100 |
| Resistance abrasion | 50km |
| Yanayin Aiki | 0 - 50 ° C |
| Girma (W*D*H) | 57.55*32.70*15.10mm |
| Mass | 36g ku |