58mm Thermal Printer Head Mechanism JX-2R-17 Mai jituwa tare da LTP02-245-13
♦ takarda mai sauƙi
♦ Ƙananan girman, nauyi mai nauyi
♦ Juriya high zafin jiki firam, karfe gear murfin
♦ Buga saurin (max): 90 mm / s (a 8.5 V irin ƙarfin lantarki na mota, 2-2 lokaci drive)
♦ Faɗin ƙarfin aiki (3.5 V-8.5V)
♦ Babban daidaito (dige 8 / mm)
♦ Sanya rayuwa: fiye da 50 km
♦ Ƙananan amo: brushless Magnetic ingiza mataki motor; high lalacewa juriya, hada da resistant zuwa high / low zafin jiki na musamman injiniyoyi robobi, sa shi yana da ƙananan amo.
♦Printer/tasha mai ɗaukar nauyi
♦ EFT
♦ Rijistar kuɗi
♦ POS
♦ Injin nauyi
♦ Kayan aikin likita
| Abu | Ƙayyadaddun bayanai |
| Hanyar bugawa | Buga layin dot thermal |
| Ingantacciyar faɗin bugu (mm) | 48 |
| Ƙimar zafi (dige/mm) | 8 |
| Buga ɗigon kowane layi | digo 384 |
| Faɗin takarda (mm) | 58 |
| Matsakaicin digo (mm) | 0.125 mm |
| Girman digo | 0.125mmx 0.12mm |
| Gudun bugawa (MAX) | 90mm/s (a 8.5V ƙarfin lantarki na mota) |
| Gano zafin kai na thermal | Ta hanyar thermistor |
| Gano takarda | Ta hanyar katsewar hoto |
| Wutar lantarki mai aiki (V) | 3.13-8.5 |
| Logic ƙarfin lantarki (V) | 2.7-5.25 |
| Wutar lantarki | 3.5 ~ 8.5 |
| Yanayin aiki | +0C ~ 50C |
| Yanayin aiki | 20% ~ 85% RH |
| adana zafin jiki | -2O'C'6O'C |
| adana zafi | 5% ~ 95% RH |
| Hayaniyar inji | <60dB |
| Lokutan buɗe allurai | > sau 5000 |
| Ƙarfin tsokanar takarda ta thermal | 250 g |
| Takardar zafi ta kama ƙarfin birki | 280g ku |
| Tsoron rayuwa | >50km |
| Rayuwar wutar lantarki | Fitar miliyon ɗari (a ƙarƙashin daidaitattun yanayin bugun mu.) |
| Mass(g) | 30 g |
| Girman fa'ida (DxWx H) | 67.2 ± 0.2mm, 18.1 ± 0.2mm * 31.8 ± 0.2mm |