3 inch 80mm JX-3R-01/01RS Thermal Printer Mechanism Mai jituwa tare da FTP-638MCL103/101
◆ Takarda mai sauƙi
◆ Karamin girma
◆ Metal frame, karfe gear shaft, barga, abin dogara, high rayuwa, m zafi dissipation
Babban saurin bugu (max): 60mm / s (a 8.5 V motor ƙarfin lantarki)
◆ Faɗin wutar lantarki
◆ Babban daidaito (digi 8 / mm)
◆ Rayuwa mai tsayi: fiye da kilomita 50
◆ Low amo: brushless Magnetic mataki motor; high lalacewa juriya, hada da resistant zuwa high / low zafin jiki na musamman injiniyoyi robobi, sa shi yana da ƙananan amo.
♦ Fitar / tasha mai ɗaukar hoto
♦ EFT
♦ Rijistar kuɗi
♦ POS
♦ Injin nauyi
♦ Kayan aikin likita
| Abu | Ƙayyadaddun bayanai |
| Hanyar bugawa | Buga layin dot thermal |
| Faɗin bugawa (mm) | 72 |
| Ƙimar zafi (digi / mm) | 8 |
| Buga ɗigon kowane layi | 576dots/layi |
| Faɗin takarda (mm) | 80 |
| Diga digo (mm) | 0.125 mm |
| Girman digo | 0.125mm x 0.12mm |
| Gudun bugawa (MAX) | 60mm / s (a 8.5 V motor ƙarfin lantarki) |
| Daidaitaccen takarda | 0.0625 mm |
| Gano zafin kai na thermal | Ta hanyar thermistor |
| Gano takarda | Ta hanyar katsewar hoto |
| Wutar lantarki mai aiki da firinta (V) | 4 ~ 8.5 |
| Logic ƙarfin lantarki (V) | 2.7-5.25 |
| Wutar lantarki | 4.2 ~ 8.5 |
| Yanayin aiki | +0 ℃ ~ 50 ℃ (ba gel) |
| Yanayin aiki | 20% ~ 85% RH (babu gel) |
| adana zafin jiki | -20 ℃ ~ 60 ℃ (ba gel) |
| adana zafi | 5% ~ 95% RH (ba gel) |
| Hayaniyar inji | <60dB |
| Platen bude-kusa lokutan | > sau 5000 |
| Ƙarfin tsokanar takarda ta thermal | ≥50 g |
| Takardar zafi ta kama ƙarfin birki | ≥80 g |
| Rayuwar bugawa | >50km |
| Rayuwar wutar lantarki | Fitar miliyon ɗari (a ƙarƙashin daidaitattun yanayin bugun mu.) |
| Mass(g) | Kusan 50g |
| Girman fayyace (D x W x H) | 92.4mm x 32.9mm x 15.4mm |