3 inch 80mm Thermal Printer Mechanism PT721 Mai jituwa tare da LTPV345
♦ Ƙarƙashin wutar lantarki
Wutar lantarki da ake amfani da shi don fitar da shugaban firinta na thermal daidai yake da ƙarfin hankali, ko kuma layin wutar lantarki guda 5 V ne ke motsa shi, iyakar ƙarfin aiki shine 4.2V-8.5V, don haka batir NI-Cd huɗu zuwa shida ko Ni- Hakanan ana iya amfani da batir MH. Ana iya amfani da batura li-ion guda biyu.
♦ Ƙaƙƙarfan ƙira da ƙima
The inji ne m da haske, girma: 93mm (nisa) * 34.5mm (zurfin) * 39.5mm (tsawo)
♦ Bugawa tare da babban ƙuduri
Shugaban firinta mai girma na dige 8/mm yana yin kyakkyawan ingancin bugawa
♦ Babban saurin bugu
Dangane da ikon tuƙi da azancin takarda mai zafi, saita saurin bugu daban-daban da ake buƙata. Saurin bugawa shine 85 mm/s (max.)
♦ Sauƙi mai ɗaukar takarda
Tsarin abin nadi na roba mai lalacewa yana sa ɗaukar takarda cikin sauƙi
♦ Ƙananan amo
Ana amfani da bugu na ɗigon zafi don tabbatar da ƙaramar buguwar amo.
♦ EFT POS tashoshi
♦ Na'urorin aunawa
♦ Kayan aikin likita
♦ Ma'aunin nauyi
| Tsarin Tsarin | Saukewa: PT721 |
| Hanyar bugawa | Zazzage layin kai tsaye |
| Ƙaddamarwa | dige 8/mm |
| Max. Nisa Buga | 72mm ku |
| Adadin Dige-dige | 576 |
| Nisa Takarda | 79.5 ± 0.5mm |
| Max. Saurin bugawa | 85mm/s |
| Hanyar Takarda | Mai lankwasa |
| Shugaban zafin jiki | By thermistor |
| Fitar Takarda | Ta hanyar firikwensin hoto |
| Buɗe Platen | By inji SW |
| TPH Logic Voltage | 4.5V-5.5V |
| Fitar da Wutar Lantarki | 4.2-8.5V |
| Shugaban (Max.) | 3.33A (8.5V/64 dige) |
| Motoci | 1.0 A |
| Kunna bugun jini | miliyan 100 |
| Resistance abrasion | 50km |
| Yanayin Aiki | 0 - 50 ℃ |
| Girma (W*D*H) | 93.0*34.5*39.50mm |
| Mass | 91g ku |