JX-3R-03 80mm Thermal Printer Head Mechanism mai jituwa LTPF347F
♦ Ƙarƙashin wutar lantarki
Wutar lantarki da ake amfani da shi don fitar da shugaban firinta na thermal daidai yake da ƙarfin hankali, ko kuma ana sarrafa shi ta hanyar layin wuta guda 5 V, kewayon ƙarfin aiki shine 23.5V-25.2V.
♦ Ƙananan ƙarar Ƙarƙashin Ƙarƙashin Ƙira da haske
The inji ne m da haske, girma: 102mm (nisa) * 54mm (zurfin) * 25.8mm (tsawo)
♦ Buga tare da Babban ƙuduri
Shugaban firinta mai girma na dige 8/mm yana sa bugu a bayyane kuma daidai
♦ Babban saurin bugu
Dangane da ikon tuƙi da azancin takarda mai zafi, saita saurin bugu daban-daban da ake buƙata. Matsakaicin saurin bugawa shine 220 mm/sec.
♦ Sauƙi mai ɗaukar takarda
Tsarin abin nadi na roba mai lalacewa yana sa ɗaukar takarda cikin sauƙi
♦ Ƙananan amo
Ana amfani da bugu na ɗigon zafi don ba da garantin buga ƙaramar amo.
♦ Injin ATM
♦ POS printer
♦ Wasan kwaikwayo da caca
♦ Kiosks
♦ Injin siyarwa
♦ Mitar Kiliya
♦ Tikitin tikiti
♦ Zabe
| Hanyar bugawa | Zazzage layin kai tsaye |
| Ƙaddamarwa | dige 8/mm |
| Max. Nisa Buga | 72mm ku |
| Adadin Dige-dige | 576 |
| Nisa Takarda | 79.5 ± 0.5mm |
| Max. Saurin bugawa | 220mm/s |
| Hanyar Takarda | Mai lankwasa |
| Shugaban zafin jiki | By thermistor |
| Fitar Takarda | Ta hanyar firikwensin hoto |
| Buɗe Platen | By inji SW |
| TPH Logic Voltage | 3.0V-5.5V |
| Fitar da Wutar Lantarki | 24V ± 10% |
| Shugaban (Max.) | 3.3A (24V/144 dige) |
| Motoci | 300mA |
| Kunna bugun jini | miliyan 100 |
| Resistance abrasion | 100KM |
| Yanayin Aiki | 0 - 50 ℃ |
| Girma (W*D*H) | 102*54.0*25.8mm |
| Mass | 175g ku |