58mm 2 Inci Kai tsaye Thermal Printer Mechanism PT542 Mai jituwa FTP629 MCL103
♦ Ƙarƙashin wutar lantarki
Wutar lantarki da ake amfani da ita don fitar da shugaban firinta na thermal daidai yake da ƙarfin ƙarfin hankali, ko kuma ana sarrafa shi ta hanyar layin wuta guda 5 V, kewayon ƙarfin aiki shine 24V-26.5V
♦ Ƙaƙƙarfan ƙira da ƙima
The inji ne m da haske, girma: 82.3 mm (nisa) * 40.5mm (zurfin) * 20mm (tsawo)
♦ Bugawa tare da babban ƙuduri
Shugaban firinta mai girma na dige 8/mm yana yin kyakkyawan ingancin bugawa
♦ Babban saurin bugu
Dangane da ikon tuƙi da azancin takarda mai zafi, saita saurin bugu daban-daban da ake buƙata. Saurin bugawa shine 200 mm/s (max.)
♦ Sauƙi mai ɗaukar takarda
Tsarin abin nadi na roba mai lalacewa yana sa ɗaukar takarda cikin sauƙi
♦ Ƙananan amo
Ana amfani da bugu na ɗigon zafi don tabbatar da ƙaramar buguwar amo.
| Tsarin Tsarin | Saukewa: PT542 |
| Hanyar bugawa | Zazzage layin kai tsaye |
| Ƙaddamarwa | dige 8/mm |
| Max. Nisa Buga | 54mm ku |
| Adadin Dige-dige | 432 |
| Nisa Takarda | 57.5 ± 0.5mm |
| Max. Saurin bugawa | 200mm/s |
| Hanyar Takarda | Lanƙwasa/Madaidaici |
| Shugaban zafin jiki | By thermistor |
| Fitar Takarda | Ta hanyar firikwensin hoto |
| Buɗe Platen | By Mechanical SW |
| TPH Logic Voltage | 3.0V-5.25V |
| Fitar da Wutar Lantarki | 24V± 10% |
| Shugaban (Max.) | 2.9A (24V/96 dige) |
| Motoci | 500mA |
| Kunna bugun jini | miliyan 100 |
| Resistance abrasion | 50km |
| Yanayin Aiki | 0 - 50 ° C |
| Girma (W*D*H) | 82.3*40.5*20.0mm |
| Mass | 110 g |