Original Fujitsu FTP-628MCL401 Thermal Printer Mechanism
Jerin FTP-628 MCL na'urorin firintocin sauri ne masu tafiyar da baturi tare da faɗin takarda 2-inch daidai.
Za a iya amfani da Tsarin FTP-628 MCL don aikace-aikace iri-iri, kamar tashoshi masu ɗaukar nauyi, POS, tashoshi na banki, da aunawa da kayan aikin likita.
• Ultra low profile
Tsawon 21.8 mm, nisa 81.2 mm, zurfin 42.2 mm
• Babban saurin bugu
Yana iya buga a 80 mm/s (640 digogi/s) a matsakaicin ƙarfin wutar kai na 9.5V
• Mai yankan atomatik
Cikakken nau'in yanke da nau'in nau'in yanke nau'in nau'in nau'in nau'in nau'in yanke suna samuwa ta zaɓin mai amfani.
• Sauƙaƙan lodin takarda
Tsarin sakin farantin mu na musamman yana ba da damar faɗuwar hanyar takarda koda kuwa firinta yana da ƙarfi sosai, don haka ana iya shigar da takarda cikin sauƙi.
• Simin simintin mutuwa na ayyuka da yawa
Faɗin zafin jiki mai aiki, bugu mai tsayi mai tsayi, babban ɗaukar ESD da fitarwa na girgizawar wutar lantarki mai tsayi da juriya.
• Mai yarda da RoHS
• Rijistar kuɗi
• EFT POS tashoshi
• Tushen gas
• Tashoshi masu ɗaukar nauyi
• Na'urorin aunawa da masu tantancewa
• Mitar tasi
| Abu | Ƙayyadaddun bayanai | ||
| Lambar sashi | FTP-628MCL401#01/451#01 | ||
| Hanyar bugawa | Hanyar digo na thermal-line | ||
| Tsarin digo | 384 dige-dige | ||
| Matsayin digo (Horizontal) | 0.125 mm (digi 8/mm)—Yawan ɗigo | ||
| Matsayin digo (A tsaye) | 0.125 mm (digi 8/mm)—Farin ciyarwar layi | ||
| Wurin bugawa mai inganci | mm48 ku | ||
| Adadin ginshiƙai | ANK 32 ginshiƙai/layi (mafi girman font ɗin dige 12 x 24) | ||
| Faɗin takarda | mm58 ku | ||
| Kaurin takarda | 60 zuwa 85 um (wasu takarda a cikin wannan kewayon ƙila ba za a yi amfani da su ba saboda halayen takarda) | ||
| Saurin bugawa | Matsakaicin 80mm/sec. (640dotline/sec.) a 9.5V*1Mafi girman 60mm/sec.(480 digo/sec.) a 8.5V*2 | ||
| Nau'in halaye | Alphanumeric, kana:159 nau'ikan haruffa na duniya:195 nau'ikan JIS Kani (Kanji CG loaded board): kimanin nau'ikan 6800 | ||
| Hali, girma (WxH), adadin ginshiƙai | 12 x 24 dige, (1.5x 3.0 mm), ginshiƙai 32: ANK24 x 24 dige, (3.0x 3.0 mm), ginshiƙai 16: ANK8 x 16 dige, (1.0x 2.0 mm), 48 ginshiƙa: ANK16x 16 dige, (2.0 x 2.0 mm), ginshiƙai 24: ANK | ||
| Interface | Yayi daidai da RS232C/Centronics | ||
| Tushen wutan lantarki | Don buga kai | 4.2 zuwa 9.5VDC,2.4A(Head ƙarfin lantarki 7.2VDC, juriya 176Q,259C, lokaci guda shafi dige 64) | |
| Don mota | 4.75 zuwa 9.5VDC, 0.75A mafi girma | ||
| Don injin yankan | 4.75 zuwa 9.5VDC, 1.0A mafi girma | ||
| Domin dabaru | 3.3 ko 5VDC +/- 10%, 0.1A matsakaicin | ||
| Girma | Mechanism tare da abun yanka | 81.2x 42.2x 21.8 mm (WxDxH) | |
| allon sadarwa | 70 x 60 x 12 mm | ||
| Nauyi | Mechanism tare da abun yanka | Kimanin g 100 | |
| allon sadarwa | Kimanin 25g | ||
| Rayuwa | Shugaban | Juriya na bugun jini: 100 miliyan bugun jini / digo (a karkashin yanayin mu); Juriya na abrasion: nisan tafiya takarda 50km (rabin bugawa: 25% ko ƙasa da haka) | |
| abun yanka | 500,000 yanke | ||
| Platen | sau 5,00 (buɗe/rufe) | ||
| muhallin aiki | Yanayin aiki* | +5° zuwa +40°℃ (garanti) | |
| Yanayin aiki | 20 zuwa 5% RH (babu condensation) | ||
| Yanayin ajiya | -20 ° C zuwa + 60 ° C (ba a haɗa takarda ba) | ||
| Yanayin ajiya | 5 zuwa 90% RH (babu condensation) | ||
| Aikin ganowa | Gane yanayin zafin kai | Thermistor ne ya gano shi | |
| Fitar da takarda/gano alama | Mai daukar hoto ya gano shi | ||
| Sakin Platen | An gano shi ta hanyar sauyawa mai zamewa | ||
| Ruwa mai motsi | Mai katse hoto ne ya gano shi | ||
| Shawarar takarda mai zafin zafi | Takarda Mai Girma: TF50KS-E4 (Takardar Nippon) | ||
| Madaidaicin takarda: TF60KS-E(Takardar Nippon), | |||
| Matsakaici Takarda Rayuwa: TF60KS-F1, | |||
| Takardar Rayuwa: PD160R-N (Takardar Oji), | |||