58mm Thermal Printer Mechanism JX-2R-01/JX-2R-01K Mai jituwa FTP-628MCL101/103
♦ takarda mai sauƙi
♦ Ƙananan girman, nauyi mai sauƙi
♦ Ƙarfe na ƙarfe, shingen kayan aiki na ƙarfe, barga, abin dogara, rayuwa mai girma, kyawawan abubuwan thermal
♦ Saurin bugawa (max): 85 mm / s (a ƙarfin lantarki na 9.5 V)
♦ Faɗin ƙarfin aiki (3.5 V-9.5V)
♦ Babban daidaito (dige 8 / mm)
♦ Sanya rayuwa: fiye da 50 km
♦ Ƙananan amo: brushless Magnetic ingiza mataki motor;high lalacewa juriya, hada da resistant zuwa high / low zafin jiki na musamman injiniyoyi robobi, sa shi yana da low amo.
♦ Fitar / tasha mai ɗaukar hoto
♦ EFT
♦ Rijistar kuɗi
♦ POS
♦ Injin nauyi
♦ Kayan aikin likita
| Abu | Ƙayyadaddun bayanai |
| Hanyar bugawa | Buga layin dot thermal |
| Faɗin bugu mai inganci (mm) | 48 |
| Ƙimar zafi (digi / mm) | 8 |
| Buga ɗigon kowane layi | digo 384 |
| Faɗin takarda (mm) | 58 |
| Diga digo (mm) | 0.125 mm |
| Girman digo | 0.125mm x 0.12mm |
| Gudun bugawa (MAX) | 85mm / s (a 9.5V irin ƙarfin lantarki na mota) |
| Gano zafin kai na thermal | Ta hanyar thermistor |
| Ba a gano takarda ba | Ta hanyar nuna firikwensin haske |
| Wutar lantarki mai aiki (V) Head Printer | 3.13-9.5 |
| Wutar lantarki Head Logic (V) Printer | 3.13 ~ 5.25 |
| Motar aiki ƙarfin lantarki | 3.5 ~ 9.5 |
| Yanayin aiki | +0 ℃ ~ 50 ℃ |
| Yanayin aiki | 20% ~ 85% RH |
| Adana zafin jiki | -20 ℃ ~ 60 ℃ |
| Store zafi | 5% ~ 95% RH |
| Hayaniyar inji | <60dB |
| Platen bude-kusa lokutan | > sau 5000 |
| Ƙarfin tsokanar takarda ta thermal | ≥50 g |
| Takardar zafi ta kama ƙarfin birki | ≥80g |
| Sanya rayuwa | >50km |
| Rayuwar wutar lantarki | Fitar miliyon ɗari (a ƙarƙashin daidaitattun yanayin bugun mu.) |
| Mass(g) | 40.5 |
| Girman fayyace (D x W x H) | 70± 0.2mm x 33± 0.2mm x 15.3± 0.2mm |