Original Fujitsu FTP-638MCL401 Thermal Printer Mechanism
Jerin FTP-638 MCL na'urori masu saurin gudu 5V ne tare da madaidaicin madaidaicin bayanin fa'ida da kuma tsawon rai.
Za a iya amfani da Tsarin FTP-638 MCL don aikace-aikace iri-iri, kamar tashoshi POS, tashoshi na banki, da aunawa da kayan aikin likita.
• Ultra low profile
Tsawon 21.8 mm, nisa 103.2 mm, zurfin 42.2 mm
• Babban saurin bugu
Yana iya bugawa a 60 mm/s (digogi 480/s) iyakar ta amfani da keɓantaccen sarrafa tuƙi na Fujitsu.
• Mai yankan atomatik
Long rai da babban abin dogara guilotine tare da kwazo mota.
• Sauƙaƙan lodin takarda
Tsarin sakin lever ɗin mu yana ba da damar faɗuwar hanyar takarda, don haka ana iya shigar da takarda cikin sauƙi.
Firam ɗin simintin ɗimbin ayyuka
Faɗin zafin jiki mai aiki, bugu mai tsayi mai tsayi, babban ɗaukar ESD da fitarwa na girgizawar wutar lantarki mai tsayi da juriya.
• Mai yarda da RoHS
• Rijistar kuɗi
• EFT POS tashoshi
• Tushen gas
• Tashoshi masu ɗaukar nauyi
• Na'urorin aunawa da masu tantancewa
• Mitar tasi
| Abu | Ƙayyadaddun bayanai | |
| Lambar sashi | Saukewa: FTP-638MCL401 | |
| Hanyar bugawa | Hanyar digo na thermal-line | |
| Tsarin digo | 576 dige/layi | |
| Matsayin digo (Horizontal) | 0.125 mm (digi 8/mm)—Yawan ɗigo | |
| Matsayin digo (A tsaye) | 0.125 mm (digi 8/mm)—Farin ciyarwar layi | |
| Wurin bugawa mai inganci | mm 72 | |
| Adadin ginshiƙai | ANK 48 ginshiƙai/layi (mafi girman font ɗin dige 12 x 24) | |
| Faɗin takarda | mm80 ku | |
| Kaurin takarda | 60 zuwa 100 na yamma (wasu takarda a cikin wannan kewayon ƙila ba za a yi amfani da su ba saboda halayen takarda) | |
| Saurin bugawa | Matsakaicin 60mm/sec.(layin dige 480/sec.) a 8.5V | |
| Nau'in halaye | Alphanumeric, kana: nau'ikan 159 Haruffa na duniya: nau'ikan 195 JIS Kanji (Kanji CG loaded board): kimanin nau'ikan 6800 | |
| Hali, girma (WxH), adadin ginshiƙai | 12 x 24 dige, (1.5 x 3.0 mm), ginshiƙai 48: ANK 24 x 24 dige, (3.0 x 3.0 mm), ginshiƙai 24: dige ANK 8 × 16, (10 x 2.0 mm), ginshiƙai 72: ANK 16× 16 dige, (2.0 x 2.0 mm), ginshiƙai 36: ANK | |
| Interface | Yayi daidai da RS232C/Centronics | |
| Tushen wutan lantarki | Don buga kai | 4.2 - 8.5 VDC matsakaita na halin yanzu, 0.30A (2.4A ganiya) a 7.2V (rabin bugawa: 12.5%, saurin bugawa: 60mm/sec.) |
| Don mota | 4.2 - 8.5 VDC ± 5%, matsakaicin 1.0A | |
| Domin abun yanka | 7.2 - 8.5 VDC ± 5%, matsakaicin 1.1A | |
| Domin dabaru | 3.0 -5.25 VDC, 0.1 Matsakaicin | |
| Girma | Mechanism tare da abun yanka | 103.2 x 42.2 x 21.8 mm (WxDxH) |
| allon sadarwa | 70 x 60 x 12mm | |
| Nauyi | Mechanism tare da abun yanka | Kusan 118g |
| allon sadarwa | Kimanin 25g | |
| Rayuwa | Shugaban | Juriya na bugun jini: 100 miliyan bugun jini / digo (a karkashin yanayin mu);Juriyar abrasion: nisan tafiya takarda 50km (rabin bugawa: 12.5% ko ƙasa da haka) |
| Mai yanka | 500,000 cuts (20 cuts/minute) | |
| Yanayin aiki | Yanayin aiki* | 0 ° C zuwa 50 ° C |
| Yanayin aiki | 20 zuwa 85% RH (babu condensation) | |
| Yanayin ajiya | -20 ° C zuwa + 60 ° C (ba a haɗa takarda ba) | |
| Yanayin ajiya | 5 zuwa 90% RH (babu condensation) | |
| Aikin ganowa | Gano yanayin zafin kai | Thermistor ne ya gano shi |
| Fitar da takarda/gano alama | Mai katse hoto ne ya gano shi | |
| Sakin Platen | An gano shi ta hanyar sauyawa mai zamewa | |
| Shawarar takarda mai zafin zafi | Takarda Mai Girma TF50KS-E4 (Takardar Nippon) | |
| Daidaitaccen takarda: TF60KS-E (Takardar Nippon), FTP- 020PU001 (58mm), PD105R (Takarda Oji), FTP-020P0701 (58mm) | ||
| Takardar Rayuwa Matsakaici TF60KS-F1, FTP-020P0102 (58mm), PD170R (Takardar Oji), Takarda Mitsubishi P220VBB-1) | ||
| Dogon Rayuwa Takarda PD160R-N (Takarda Oji), AFB-235 (Takardar Mitsubishi), TP50KJ-R (Takardar Nippon), HA220AA (Takardar Nippon) | ||